C/S Wallglaze^® Technical Information

Substrate Primers

Substrate	Wallglaze^® Primer	Coverage Rate*	Drying Time*
Plaster / Plasterboard	C/S Penetration Primer	8m²/kg	1-2 Hours
Sand/Cement Render	C/S Penetration Primer	6m²/kg	1-2 Hours
Concrete	C/S Penetration Primer	6m²/kg	1-2 Hours
Brickwork**	C/S Masonry Primer	8m²/kg	1-2 Hours
Blockwork	C/S Masonry Primer	8m²/kg	1-2 Hours
Ceramic Tiles	C/S Multi-Surface Primer	12m²/kg	1-2 Hours
Softwood/MDF/Plywood	C/S Penetration Primer	8m²/kg	1-2 Hours
Metals	C/S Multi-Surface Primer	12m²/kg	1-2 Hours
High Pressure Laminates	C/S Multi-Surface Primer	12m²/kg	1-2 Hours
Plastics	C/S Plastic Primer	20m²/kg	1-2 Hours

Note: A clear version of each of the Wallglaze^® primers is available for use with clear Armourglaze and Armourlac coating systems
* Per coat - variable depending on type and/or temperature and humidity
** For bricks with water absorption greater than 12%, as defined by BS 5628:Part 1: 1992. Where the substrate comprises brickwork with water absorption less than or equal to 12%, C/S Penetration primer should be used.

Fibreglass Reinforcement

Where greater resistance to impact or abrasion is required, fibreglass reinforcement options may be incorporated in to the Wallshield, Wallflex or Armourglaze coating systems.

Colour Selection

C/S Wallglaze^® performance coatings are available in a range of colour options including BS, RAL or NCS type colours.

Anti-Microbial Testing

Anti-microbial tests on C/S Wallglaze^® performance coatings showed that after a 24hr period there was complete inhibition to:

Staphylococcus aureus (Oxford)
Staphylococcus aureus (MRSA)
Streptococcus
Enterococcus faecalis
Escherichia coli
Salmonella typhimurium
Pseudomonas aeruginosa
Corynebacterium diphtheriae (non-toxic)
Bacillus subtilis

Chemical and Biocidal Resistance

For more complete Chemical and Biocidal resistance test data, please contact us on +44 (0) 1296 611066 and ask for our Technical Department who will be pleased to help.

COSHH Regulations

Construction Specialties (UK) Limited comply with the statutory requirements for the Control of Substances Hazardous to Health Regulations 1994 (COSHH) (S11994 No.3246), MSD Sheets are available on request.

Environmental Issues

The C/S Group are committed to protecting the environment. We ensure:

R&D investment into environmentally friendly products
Efficient production
Minimization of waste
Recycle where possible
Safe disposal facility

C/S Wallglaze^® Samples

Samples of all products are available on request.

Warranty Policy

Construction Specialties (UK) Limited (the Company) warrants to its purchasers that their C/S Wallglaze^® products sold, will be free from defects in materials or workmanship and will meet the product criteria noted in our brochures when properly applied, installed and maintained. If, in the sole opinion of the Company, a product covered by this warranty is defective, the Company will replace it free of charge. This warranty shall extend for a period of two years following shipment by the Company. This is in lieu of all warranties expressed or implied, and is the sole warranty extended by the Company. The liability of the Company under this warranty is limited to replacement only, and does not include any responsibility for consequential or other damages of any nature.

C/S Wallglaze® Technical Information