Construction Specialties comprehensive range of hospital wall protection and entrance matting systems have been fitted at the Walsall Manor Hospital, West Midlands.
The 40,000m² extension to the 150 year old original hospital, built under a PFI scheme, has added a new Family Health and Diagnostics Centre and Outpatient and Day Case Centre to the existing building.
Colin Davidson, Project Director at Skanska, said:
“We have worked with Construction Specialties on a number of projects, so we knew they could deliver a solution which would both meet our environmental targets, and reduce the ongoing PFI maintenance costs by protecting the internal finish.”
Wall Protection
Over five kilometres of Acrovyn® wall protection profiles were used throughout the hospital giving impact protection to the interior walls. To provide support for pedestrians, Approved Document M compliant handrails were installed in circulation routes. Crash rails, rub rails and corner guards were also specified to prevent wear and tear from the high volume of traffic and equipment passing through the corridors, maintaining the appearance of the building. Bed locators were installed on the wards to protect the interior walls at bed head locations.
Acrovyn® 2mm thick sheeting was also applied throughout the two new centres including the disposal and house-keeping rooms. The product is easy to cut and form and combines essential durable impact protection with an impervious easy to clean surface.
Entrance Matting
To prolong the life of the interior floor finish and reduce cleaning requirements, ten Pediluxe® mats were used at the entrances. This aluminium profile system offers high dirt containment, is easy to clean and provides an even surface for wheeled traffic to travel across. With a surface absorption area of 80%, the Pediluxe® mats prevent water from being trampled into the building which reduces the risk of slippages for patients, visitors and staff.
In addition, Allway® GFPS and GFT expansion joint covers were used to allow for movement of the building as a result of thermal expansion and contraction. Incorporating a thermoplastic rubber gasket, these expansion joints have minimal visual impact and create a smooth and easy to clean surface.
For more information on our products please get in touch:
- phone: +44 (0)1296 652800
- email: sales@c-sgroup.co.uk
