The PDS Series is a completely watertight system, with stainless steel capping sections.
The system incorporates an extruded Santoprene gasket, capable of accommodating up to ±30mm movement.
The integral PVC wing seals can be used to tie the system into adjacent waterproofing systems.
Series Details
- Joint Width: up to 50mm
- Horizontal: up to ±30mm
- Vertical: up to ±5mm
- Lateral: up to ±12mm
- Load Capability: 1000kg point load
Movement Details
FLOOR TO FLOOR COVERS:
To order any of the below models, please call +44 (0)1296 652800
| Model | Rapid Ship? | Joint Width (mm) | Frame Depth (mm) | Exposed Surface (mm) | Min. Recess Depth Required (mm) | Min. Recess Width Required (mm) | Horizontal Movement (mm) | Vertical Movement (mm) | Lateral Movement (mm) |
|---|---|---|---|---|---|---|---|---|---|
| PDS-200/50 | NO | 50 | 50 | 120 | 55 | 213 | ±30 | ±5 | ±12 |
| PDS-200/75 | NO | 50 | 75 | 120 | 80 | 213 | ±30 | ±5 | ±12 |
| PDS-200/100 | NO | 50 | 100 | 120 | 105 | 213 | ±30 | ±5 | ±12 |
| PDS-200/125 | NO | 50 | 125 | 120 | 130 | 213 | ±30 | ±5 | ±12 |
FLOOR TO WALL COVERS:
To order any of the below models, please call +44 (0)1296 652800
| Model | Rapid Ship? | Joint Width (mm) | Frame Depth (mm) | Exposed Surface (mm) | Min. Recess Depth Required (mm) | Min. Recess Width Required (mm) | Horizontal Movement (mm) | Vertical Movement (mm) | Lateral Movement (mm) |
|---|---|---|---|---|---|---|---|---|---|
| PDSW-200/50 | NO | 50 | 50 | 86 | 55 | 132 | ±30 | ±5 | ±12 |
| PDSW-200/75 | NO | 50 | 75 | 86 | 80 | 132 | ±30 | ±5 | ±12 |
| PDSW-200/100 | NO | 50 | 100 | 86 | 105 | 132 | ±30 | ±5 | ±12 |
| PDSW-200/125 | NO | 50 | 125 | 86 | 130 | 132 | ±30 | ±5 | ±12 |
Materials, Colours & Finishes
- Stainless steel capping sections: dull polished stainless steel
- Aluminium frame sections: mill finish aluminium
- Gaskets: Santoprene central gasket available in Black as standard
- Wing seals: PVC Black as standard
Fixings
Floor: fixings (by others) to suit substrate at 450mm centres and to achieve minimum 40mm embedment.
Wall: fixings (by others) to suit substrate at 450mm centres
Note: frames are not supplied pre-drilled.
Transitions
The following pre-fabricated transitions are available on request to facilitate system installation:
- 90° corner
- T-junction
- 4-way junction
- Floor to vertical wall
Transitions are delivered to site fully assembled. Please contact us for details.
Stock Lengths
- Stainless steel sections: 3m
- Aluminium sections: 3m
- Gaskets: Rolls up to [max] 20m
- Side wing seals: Rolls up to [max] 36m
