This one-piece extruded EPDM seal creates a watertight seal when used with high-strength epoxy adhesive.
The serrated edges create epoxy reservoirs and improve adhesion to joint walls.
The closed cell design allows the system to achieve ± 50% movement capability.
- Joint Width: up to 100mm
- Horizontal: up to ±50mm
- Vertical: up to ±10mm
- Lateral: up to ±15mm
FLOOR TO FLOOR / FLOOR TO WALL SEALS:
To order any of the below models, please call +44 (0)1296 652800
|Model||Rapid Ship?||Joint Width (mm)||Exposed Surface (mm)||Min. Joint Depth (mm)||Horizontal Movement (mm)||Vertical Movement (mm)||Lateral Movement (mm)|
Materials, Colours & Finishes
EPDM elastomeric seal available in Black as standard.
Installed using high-strength epoxy adhesive (supplied by CS).
Note: The standard adhesive used with HB models is not compatible with bituminous finishes, such as asphalt. Please contact us for alternative solutions.
Note: To ensure successful installation of the system, the substrate temperature at the time of installation should be 5°C or above.
Supplied cut to suit from [max] 7.5m or 15m rolls.
*contact us for details