Construction Specialties

Wall protection | Expansion joint covers | Entrance matting

Call: 01296652810 or Buy Online
Menu
  • Home
  • Products
    • Acrovyn® Wall & Door Protection
      Acrovyn® Doors & Door Protection
      Acrovyn by Design® Bespoke Wall Coverings
      Explovent® Explosion Venting
      Omniwall Prefabricated Serviced Wall Systems
      Allway® Expansion Joint Covers
      Entrance Flooring
      Pedisystems® Entrance Flooring
      Architectural Louvres
      Architectural Louvres
      Exterior Solar Shading
      Online Shop
  • Projects
  • Blog
  • Resources
    • Brochures
      Best Practice Guides
      Market Sectors
      NBS Source Specifications
      CPD Seminars
      BIM Objects
      Legislation & Compliance
      On-Demand Webinars
  • About Us
  • Contact
  • Careers

5 Questions to Ask Before You Buy a Performance Louvre System

5 questions to ask before buying a performance louvre systemSelecting a performance louvre is often a compromise between airflow efficiency and rain defence. It is therefore important to know the answers to a few key questions before you start your selection, so that you can be sure to choose the right system. Specifying the wrong louvre system could cause problems internally, to plant and machinery or surfaces behind the louvre either by allowing rain water penetration or from restricting airflow. So let’s get started…

1. Do you know the required airflow through the Louvre?

When selecting ‘weather louvres’ one of the most important aspects is the design air intake velocity or face velocity.  The higher the face velocity the more difficult it is to prevent water penetration. During the testing of weather louvres to BS EN 13130 they are subjected to a range (0.0m/s to 3.5m/s) of face velocities to determine their rain defence performance.

Tip: Always ensure you know the performance of the louvre at YOUR air intake face velocity before specifying.

2. How efficient is your louvre?

The airflow efficiency of a louvre is simply how freely it allows air to pass through it, with the overall ‘aerodynamic free area’ determined by the aerodynamic coefficient (Cd) and face area of the louvre panel. The greater the resistance to air moving through the louvre, the greater the difference in pressure between outside and inside of the louvre, known as the pressure drop.

Where ‘energy consumption’ is important, the lower the pressure drop, the less fan power will be required. Increasing the size of the louvre at the design stage means that the required volume air flow rate can be achieved, but at a lower face velocity and reduced fan power.

3. What amount of water penetration is acceptable for your project?

As well as allowing air to flow through it, weather (rain defence) louvres must also keep wind driven  rain out.  Acceptable levels of water penetration are dependent upon the application and how important it is for the area beyond the louvre to stay dry. We find the best way to narrow down your louvre selection is to look at the BS EN 13030:2001 water penetration banding. The test is based on an external windspeed of 13m/s with 75mm/h rainfall projected onto the front of the louvre panel. Whilst these bands have quite a wide range, they will at least give you an idea as to what class of louvre you need.  Local weather conditions and topography naturally vary from place to place, so it is important to take into account your expected site conditions and compare that with the louvre test conditions.

4. Where are you installing your louvres?

The building location, position and exposure of louvre is also key.

5. How do you know the louvre you have chosen is right for your project?

We advise that you compare the simulated test results with your expected site conditions, since in reality simulated tests are never the same as actual site conditions. It’s also worth noting that a louvre with a Class A rain defence classification rating at 0m/s may not achieve acceptable rain defence performance even at 0.5m/s. Check the full range of face velocities the louvre is tested to, in order to ensure the louvre will achieve the desired performance for your specific design and site conditions.

It is worth noting that the BS EN 13030 : 2001 tests are based on a 1m x 1m test sample only, so for larger louvre panels you will need to consider how collected water is drained to prevent re-entrainment.

If you bear these questions in mind when selecting your louvre you can’t go too far wrong. However if you are in any doubt or could do with some advice or technical support get in touch with the global Louvre experts on +44(0)1296 652800 or sales@c-sgroup.co.uk

 

Filed Under: Blog Tagged With: Louvres

Louvres

2016 Louvre Brochure

We have been manufacturing and selling louvres globally for over 60 years. When you specify our systems, you get the support of a dedicated team with a wealth of experience and design capability.

The performance of our louvres has been evaluated by independent third party testing. In addition, any of our standard or bespoke solutions can be verified in our own testing chamber to ensure they achieve specified performance levels in real world conditions.

Download the brochure for:

  • Industry Leading Products
  • Innovative New Design Options
  • Detailed Technical Information
  • Louvre Specification Guidance

+44 (0)1296 652810
Get In Touch
Order a Sample
Request an Estimate
Please complete the form below, or give us a call on +44 (0)1296 652800...

Get Technical Help

Menu

  • CS Products
  • Projects
  • Blog
  • About us
  • Contact Us
  • Select Country

Contact

Construction Specialties UK Ltd
1010 Westcott Venture Park
Westcott, Bucks, HP18 0XB
United Kingdom

Visiting Us?
Get Directions

Tel: +44 (0)1296 652810
Fax: +44 (0)1296 652800
Get In Touch

Privacy

This website uses cookies to help us give you the best experience when you visit our website. By continuing to use this website, you consent to our use of these cookies. Find out more about how we use cookies and how to manage them below in our privacy policy.
Privacy Policy

CS ISO Accreditations

General Terms & Conditions

Copyright © 2023 · Construction Specialties

Copyright © 2023 · Genesis Framework · WordPress · Log in